Instant Articles

Time to make a backyard Duct Tape kayak

Great bit of fun for the kids when they are bored at weekends. This project uses my favorite materials PVC pipe, duct tape, and its fun Kayaks usually cost around $200 dollars I made this one for $50 dollars.   You can follow more of my projects here

 

Step 1: Gather Materials

1

 

 

2

 

 

3

 

 

4

 

Four 10 ft long 1/2 in diameter of SCH 40 PVC pipe (3.048 meters) $6 £4
Around 4 rolls of duct tape $28 (£17)
2 corner tees $2 (£1)
4 tees $4 (£2.5)

Step 2: Put the frame together

5

 

6

 

7

 

8

Cut two 7.5 ft (2.2 meters) long pieces

Get a corner tee and put the 7.5ft long pieces into it then get another corner tee and stick the other side of the pvc pipe into it (its supposed to bend). I had to wrap some duct tape around the middle so the PVC pipe wouldn’t come out of the corner tee.

Cut the middle of the PVC pipe and add a tee.

Get a two pieces of pvc pipe and put them in the corner tees.

Add an elbow to the two pieces (make sure the elbows point towards each other)

Put a piece 7ft 2in long of PVC pipe into the two elbows.

Cut the piece you just added in the middle and add a tee then cut about an inch away from it and add another tee.

Put a piece 20 in of PVC pipe in to the tees

Now you are ready for DUCT TAPE!

Step 3: DUCT TAPE

9

 

10

 

11

 

12

Get the duct tape and put pieces around only one side (this will allow you to achieve the “boat” form) wrap about a foot then wrap horizontally all around the frame make sure you overlap the duct tape about half do this for the whole frame. Then if there are any “creases” (see picture) duct tape horizontally

 

Step 4: Leaks

13

When you test it if there are any leaks the culprit maybe in the middle where there are horizontal pieces of duct tape to fix this just add a piece of duct tape where the horizontal and vertical pieces meet.

Step 5

No kayak is complete without a paddle!

What you need for a paddle

A little length of vines
Duct tape
25 in piece of PVC pipe
A PVC pipe tee
Make a loop and duct tape where the two ends of the loop meet then wrap the whole thing (except a little part of the vine on the end) in duct tape. Put a 25 in piece of PVC pipe on the part you didn’t duct tape then add a tee to the end of the PVC pipe

 

14

 

15

 

16

 

17

 

18

Now go kayaking in a river!

Paul Pinkerton

Recent Posts

15+ Incredible Photos Of The Fagradalsfjall Volcano Erupting In Iceland

The Fagradalsfjall volcano, on Iceland's Reykjanes Peninsula, erupted on December 18, 2023, after weeks of…

11 hours ago

The Truth About Missing Woman Discovered By Drone

Each year, numerous individuals become lost while traversing America's vast national parks and hiking trails.…

12 hours ago

These Underwater Photos Will Make You Want To Never Swim In the Ocean Again

Imagine swimming through the ocean, having a relaxing float in a creek or adventuring in…

3 days ago

10 Common, Edible Mushrooms to Forage and Enjoy

Searching for mushrooms can be a fun way to spend time outdoors while also scoring…

3 days ago

Looking for a Relaxing Vacation? Avoid These Tourist Hotspots

Overtourism is defined by Solimar International as "the increase in tourist numbers at such high…

6 days ago

7 Incredible Constellations That You Can See From The Southern Hemisphere

North Americans who look at the night sky are familiar with the constellations that dot…

6 days ago